• Proven systems designed to maximize labor savings & roof lifecycle.
• Fast Roofs! with Mule-Hide Acrylic Water Base Bonding Adhesive. Single-side, wet application lets contractors accept more jobs, have fewer callbacks. Plus, great for crew retention.
• Laminated Tapes are designed for a consistent thickness and width of seam.
• Complete line of EPDM Accessories like Pre-Fabricated Pipe Boots and Pre-Cut Corners.
• Standard System Warranties and Membrane-Only Material Warranties.
• Fully Adhered, Ballasted, & Mechanically Attached System Specifications.
• Membrane meets or exceeds ASTM performance standards.

Mule-Hide.

• Proven systems designed to maximize labor savings & roof lifecycle.
• Fast Roofs! with Mule-Hide Acrylic Water Base Bonding Adhesive. Single-side, wet application lets contractors accept more jobs, have fewer callbacks. Plus, great for crew retention.
• Laminated Tapes are designed for a consistent thickness and width of seam.
• Complete line of EPDM Accessories like Pre-Fabricated Pipe Boots and Pre-Cut Corners.
• Standard System Warranties and Membrane-Only Material Warranties.
• Fully Adhered, Ballasted, & Mechanically Attached System Specifications.
• Membrane meets or exceeds ASTM performance standards.

Non-Reinforced Black EPDM .045

• The most economical singly-ply membrane
• Ideal for ballasted systems

Non-Reinforced Black EPDM .060

• Ideal for fully adhered systems

Reinforced Black EPDM .045 & .060

• Reinforced with tough polyester fabric for superior fatigue, tear, & puncture resistance
• Ideal for mechanically attached systems

White-on-Black Non-Reinforced EPDM .060

• Reflects the sunlight & cools the building interior - leading to lower BTU usage and energy costs
• Fully adhered application is required

A-300 is ENERGY STAR® qualified.
Coatings can typically be an expense, not a capital investment as in reroofing.
A tax advantage while saving energy

• Excellent reflectivity
• Lifecycle & energy savings benefits
• Applied/installed cost value
• Applies quickly, easily, and safely
• Warranties available Nationwide at over 300 locations

White Mule-Hide A-300 FINISH Coating has been independently tested to EPA guidelines with results of initial solar reflectance values of up to 86% and 3-year aged values up to 72%; plus, emissivity values of 91%. Can reduce surface temperatures on metal roofs by as much as 50°F. Mule-Hide is an ENERGY STAR® Partner and we're proud of the excellent reflectivity of Mule-Hide Elastomeric Acrylic Coatings.

The "Affordable White Roof" – Mule-Hide TPO Systems.

• The performance of rubber with heat-welded seams
• The weathering and low temperature flexibility of EPDM with the superior seam strength of heat-wieldable membranes
• White membranes reflect sunlight and cool building interior for energy savings.
• Wide sheets mean less seams and less labor compared to standard PVC sheets.
• More product on top of the scrim where you need it most - one of the thickest top plies in the industry.
• Minimal shrinkage for watertight integrity you can count on.
• Complete line of TPO Accessories such as Pre-fabricated Pipe Boots and Pre-Cut Corners.
• Standard System Warranties and Membrane-Only Material Warranties.
• Mechanically Attached, Fully Adhered, and Ballasted System Specifications.
• Membrane meets or exceeds ASTM performance standards.

Reinforced TPO (white, gray, tan, other colors by special order)
.045", .060", & .080"

• Thermoplastic polyolefin based for superior strength and weatherability
• Lightweight yet highly resistant to tears, impact, punctures, & wind uplift
• Ideal for both new construction and reroofing/restoration
• Reinforced membrane easily handles building thermal expansion & contraction
• Minimal shrinkage - ideal for mechanically attached or fully adhered systems
• Environmentally friendly - no chlorine, recyclable

The "Affordable White Roof" – Mule-Hide TPO Systems. 

• Applicators trust Mule-Hide professional grade coatings for long-term performance and ease of application without the use of fabrics.
• Easy step-by-step application process lets crews finish jobs in record time, water based for simple cleanup.
• VOC compliant with excellent reflectivity and emissivity.
• Truly "elastomeric" - many products (paints, aluminum coatings) are being sold as elastomerics even though they don't actually have the properties of a high performance elastomeric coating.
• Standard System Warranties and Membrane-Only Material Warranties.

White Mule-Hide A-300 FINISH Coating has been independently tested to EPA guidelines with results of initial solar reflectance values of up to 86% and 3-year aged values up to 75%; plus emissivity values of 91%. Reflectivity is the percentage of the sun’s heat a roof keeps off a building, and emissivity is the percentage of heat a roof lets out of a building. Can reduce surface temperatures on metal roofs by as much as 50°F. 

California Contractors... Are you ready to comply?
Select the CA Title 24 tab for more information

Disclaimer: When installed properly, this product will help reduce energy costs. Actual savings will vary based on geographic location and individual building characteristics. Consult Mule-Hide, your roofing contractor, or call 1-888-STAR-YES (1-888-782-7937) for more information.

Mule-Hide is an ENERGY STAR® Partner and a member of the Cool Roof Rating Council. We're proud of the excellent reflectivity of Mule-Hide Elastomeric Acrylic Coatings.

IMPORTANT NOTES (Details and information subject to change):
When applying coatings over an existing roof under warranty, the building owner should check with existing roofing system manufacturer, as this coating application may void warranty. In all cases, the existing roofing system must be in sound condition. Mule-Hide is NOT responsible for any defects in the existing roofing system. The information herein should not be considered all-inclusive and should always be accompanied by good application practices. The applicator has sole responsibility for the quality of application of the coating system. Mule-Hide requires proper surface preparation of the existing roofing system. To repair blisters, splits, and other surface defects, Mule-Hide recommends that they be repaired in accordance with the published NRCA Repair Manual for Low-Slope Roofing Systems guidelines prior to application of Mule-Hide Elasomeric Coatings.

Cool temperatures and high humidity retard curing. Do not apply Elastomeric Acrylic Coatings if weather conditions will not permit complete cure. Mule-Hide Coatings are NOT intended for use over graveled surfaces (Spudded Roofs are also NOT acceptable.) Refer to Mule-Hide Coatings Specification Manual for details prior to application.

Mule-Hide recommends ADHESION TESTS PRIOR TO COATING to ensure adhesion and compatibility between the coating and the substrate. Mule-Hide also RECOMMENDS a two (2)-coat application. If finished coverage rates exceed two (2) gallons per square, 2 coats are REQUIRED. Product blisters may occur if coatings are applied too thick in high temperatures.

Energy savings from installation of an ENERGY STAR® Roof Product are climate specific and may vary significantly from building to building. The greatest savings will occur in buildings located in hot and sunny climates that have a high roof surface to building volume ration, and lower levels of attic insulation. For more information about the energy savings you can get from installing an ENERGY STAR® Roof Product on your building contact your roof product manufacturer, roofing contractor, or call 1-888-STAR-YES (1-888-782-7937)

The information herein is based upon data and knowledge considered to be true and accurate and is provided for the applicator's consideration, investigation and verification. However, Mule-Hide products are made without knowledge of your particular roof and/or coatings project and such an application may not be fit for your particular purpose. MULE-HIDE DISCLAIMS ALL WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, except written warranties attached to Mule-Hide products and written warranties signed by an officer of Mule-Hide.

© 2001 Mule-Hide Products Co., Inc